Part 5- Once a Geothermal Heat Pump System is installed then System was Flushed and Purged.

Once Geothermal Heat Pump System was installed then System was Flushed and Purged. New home in Stillwater, Oklahoma. Flushing and purging a Geothermal Heat Pump System is very important to remove air bubbles. Air bubbles in a system will cause cavitations in heat pumps and loss of heat transfer. Flushing and purging also removes debris, and allows for installation of antifreeze solution. 30% Tax Credit for installing Geothermal Heat Pumps. Video created by owner of property. For more information http://www.igshpa.okstate.edu

Part 4- Installing Ductwork, Piping and Geothermal Heat Pumps

Installing Ductwork, Piping and Geothermal Heat Pumps in a new home in Stillwater, Oklahoma. Both a supply and return duct was installed in each room except no return in bathrooms and kitchen. Piping from the ground loop through the attic to the geothermal heat pumps was installed. A 2, 3 and 4 ton Geothermal Heat Pumps installed and connected to ground loops and ductwork. 30% Tax Credit for installing Geothermal Heat Pumps. Video created by owner of property. For more information http://www.igshpa.okstate.edu

Part 3- Creating the Header for Ground Loops for a Geothermal Heat Pump System

Creating the Header for Geothermal Heat Pump System for a new home in Stillwater, Oklahoma. 6 boreholes were drilled 300 feet deep, a ground loop installed and the boreholes were grouted. A header connecting all 6 ground loops were installed with reverse return which allows each loop to have the same inlet and outlet pressure. Used to cancel the effects of pressure loss along the header. 30% Tax Credit for installing Geothermal Heat Pumps. Video created by owner of property. For more information http://www.igshpa.okstate.edu